397 结果为 '电火花成型机'
3R-610.46-3N
用整体空气单元安装在机床上。用于水平和垂直使用。
3R-651.7E-N
硬化和精确铸造,带有四个固定螺钉的间隙孔。 注意:必须将其锁定在卡盘之前安装在工件/固定装置上。
3R-651E-N
用间隙孔硬化四个固定螺钉。
3R-601.1E-N
3R-651.75E-N
用清除孔硬化并铣削八个固定螺钉。 注意:必须将其锁定在卡盘之前安装在工件/固定装置上。
3R-601.7-N
3R-606-N
检查Mandrel的地面C引用,以设置宏chuck。
3R-696.1-260
用于设置平坦度和角度位置。居中的地面孔。
3R-27.2
用于安装在机械主轴上或机械表上。
3R-SP15055
用地法铸造Chuck,以安装在固定装置/板上。
3R-600.24-S
用地面脸铸造Chuck,以安装在机器主轴上,并用3R-A11489或机桌上的固定装置。
3R-SP24460
气动卡盘用于建筑物,例如在固定装置中,将头部或B轴分开。