Tooling for wire EDM
144 risultati per 'Tooling for wire EDM'
Fixed mounting head, MacroTwin
3R-266.12HP
For manual mounting of Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted
Presetting stone, Wire EDM
3R-228J
Stone with three ground faces, a reference element and a clearance stone. Together with a surface plate and a dial indicator, 3R-228J is an excellent presetting tool for a modest outlay.
EconoRuler, Wire EDM
3R-209-350
Universal ruler for mounting directly on the machine table. EconoRuler L=350 mm.
EconoRuler, Wire EDM
3R-209-610
Universal ruler for mounting directly on the machine table. EconoRuler L=610 mm.
EconoRuler, Wire EDM
3R-209-860
Universal ruler for mounting directly on the machine table. EconoRuler L=860 mm.
Control ruler, Wire EDM
3R-206.10
Control ruler for horizontal Macro chucks. One long side ground to the Macro references. Supplied with engraved dimensions in the X-, Y- and Z-directions.
Wire alignment unit, Wire EDM
3R-220.3
Unit with double-insulated reference contacts for wire alignment.