Tooling
683 risultati per 'Tooling'
Drawbar, Matrix185
3R-695.2-185RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Manual adapter, Macro-HSK-63A
3R-SP29745
Access to clamping from underneath. Torque wrench for optimal performance.
Pneumatic chuck adapter, Matrix185-Macro
3R-SP29998
From Matrix185 into Macro system. Chuck adapter with built-in Macro chuck.
Control ruler, Matrix185
3R-696.1-185
For setting flatness and angular positions. Ground hole for centering.
Manual chuck adapter, Macro-MacroJunior
3R-466.10033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
Pneumatic chuck, Matrix220
3R-690.1-220-RS
Rust resistant chuck for permanent mounting on the machine table.
Pneumatic built-in chuck, Matrix220
3R-SP28340-RS
Rust resistant chuck for permanent mounting in the machine table.
Drawbar, Matrix220
3R-695.2-220RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Control ruler, Matrix220
3R-696.1-220
For setting flatness and angular positions. Ground hole for centering.
Rotating spindle, Macro
3R-6.600-VS
For mounting in a Macro chuck. Flushing via flushing connection. For vertical mounting in EDM machines.
Pneumatic built-in chuck, Matrix260
3R-SP28345
Chuck for permanent mounting in the machine table or into a PM press.
Reference element 54x54 mm, MacroStd
3R-651.7E-XS
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.