Tooling
683 risultati per 'Tooling'
Fixed mounting head, Wire EDM
3R-266.4
For manual mounting of SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted.
Spacer element 30 mm, Wire EDM
3R-223.3
Used where vertical or horizontal displacement of workpiece or accessory is necessary.
Swivelling element 360°, Macro
3R-203.66
Swivelling element with manual Macro chuck to be mounted onto a Macro chuck. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.
Swivelling element 360°, Macro
90937
Swivelling element with manual Macro chuck to be mounted onto leveling heads. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.
Swivelling element 360° with encoder, Macro
D-30232
Swivelling element with manual Macro chuck. Display included.
Vertical fixed adapter, Macro
3R-226.6
For horizontal clamping SuperVice and holders in vertical Macro chucks.
Vertical levelling adapter, Macro
3R-262.6
For horizontal mounting of SuperVice and holders in vertical Macro chucks.
Levelling adapter, Wire EDM
3R-232S
For mounting SuperVice, a holder or a fixture directly on the machine table. Note: All holders including HP can be mounted.
Unimatic Adapter SuperVice/Macro WEDM, Wire EDM
C950480
Adapter for System 3R clamping elements with adaptation height 15 / 25 mm: with Unimatic dovetail slide.