Tooling for parts production

3R-690.1-185-RS

Rust resistant chuck for permanent mounting on the machine table.

3R-600.86-3

Pneumatic chuck for permanent mounting in the machine spindle.

3R-600.86-30

Pneumatic chuck for permanent mounting in the machine spindle. Note: When ordering state machine make and type. Note: X/Y/Z references of hardened and ground steel, larger Z-references.

3R-600.22

With setting screws for centring.

3R-600.20

For mounting on the machine spindle with 3R-A3620 or on a lathe taper with centring ring 3R-612.6.

3R-690.1-220-RS

Rust resistant chuck for permanent mounting on the machine table.

3R-SP28340-RS

Rust resistant chuck for permanent mounting in the machine table.

3R-695.2-220RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-696.1-220

For setting flatness and angular positions. Ground hole for centering.

3R-602.81RS

Pneumatic chuck for permanent mounting on the machine table.

3R-SP28345

Chuck for permanent mounting in the machine table or into a PM press.

3R-696.1-260

For setting flatness and angular positions. Ground hole for centering.