Tooling for parts production

3R-696.1-142

For setting flatness and angular positions. Ground hole for centering.

3R-695.2-185RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-690.1-185-RS

Rust resistant chuck for permanent mounting on the machine table.

3R-SP29998

From Matrix185 into Macro system. Chuck adapter with built-in Macro chuck.

3R-696.1-185

For setting flatness and angular positions. Ground hole for centering.

3R-690.1-220

Chuck for permanent mounting on the machine table or into a PM press.

3R-690.1-220-RS

Rust resistant chuck for permanent mounting on the machine table.

3R-SP28340-RS

Rust resistant chuck for permanent mounting in the machine table.

3R-695.2-220RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

S220400

Contains all elements for a normal service.

3R-680.24-S

Low profile pneumatic chuck for permanent mounting on the machine spindle or table. Note: Master pallet 3R-606.1 or 3R-686.1-HD is required at installation.

3R-680.1-2

Pneumatic chuck for machine spindles and lathes. Opened/locked by an air gun against a valve on the side, or alternatively on the back, of the chuck.