Tooling for parts production
416 risultati per 'Tooling for parts production'
Reference element Ø75 mm, MacroNano
3R-651.75E-N
Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 70x70 mm, MacroNano
3R-601.7-N
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Manual chuck adapter, Matrix110-Ø20
3R-SP31380-RS
Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.
Manual chuck, MacroStd
3R-600.23-S
Cast chuck with mounting flange for mounting on the machine spindle or in a fixture.
Drawbar, Matrix142
3R-695.2-142RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Manual chuck, MacroStd
3R-600.24-S
Cast chuck with ground back face for mounting on the machine spindle with 3R-A11489 or in a fixture on the machine table.
Manual chuck (low profile), MacroStd
3R-600.28-S
Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488.
Pneumatic chuck, MacroHP
3R-600.15-3
Rust resistant pneumatic chuck for permanent mounting on the machine table.