Tooling for powder compacting
45 risultati per 'Tooling for powder compacting'
3Refix PM mandrel, Ø20 mm, 3Refix
3R-901-20PM-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
3Refix PM mandrel, Ø10 mm, 3Refix
3R-901-10PM-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Pneumatic chuck, Macro PM
3R-600.17-30
Pneumatic chuck for permanent mounting in spindle of powder press machine.
Reference element Ø75 mm, Macro
3R-651.75-50E
Hardened and milled with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Lifting device, Matrix110 and Matrix142
3R-692.8-142
In combination with 3R-692.7-110 and 3R-692.7-142 to enable lift by crane.
Manual chuck, MacroMagnum PM
3R-680.27-150
Manual chuck for permanent mounting in spindle of powder press machine.