Tooling for EDM
397 risultati per 'Tooling for EDM'
Splash guard, MacroCombi
90027.02
Intended for MacroCombi chucks. Can also be used as a cover for unused chucks.
Ring with code carrier, MacroJunior
3R-863.25-10
With pre-programmed unique identity, designed for MacroJunior 25 mm, 3R-491E.
Angle shelf
3R-A21944
For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.
Manual lathe chuck, Mini
3R-321.2-4x90
Hydraulic chuck with set screws, for mounting on a lathe taper.
Electrode holder, Mini
3R-310EE
Holder with hardened reference part Ø20 mm and unhardened flange Ø50 mm.
Electrode holder Ø20 mm, Mini
3R-322-25S
Holder with hardened reference part and unhardened electrode mounting part.
3Refix mandrel, 3Refix
3R-901-20E
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Slotted bushes, 3Refix
3R-903-20.235
Bushes of hardened spring steel 54 HRC. Outside diameter 23.5mm
3Refix mandrel, 3Refix
3R-901-20RS
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Reference tables, 3Refix
3R-936-85.40
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.