Tooling for wire EDM
144 risultati per 'Tooling for wire EDM'
SuperVice, Prism, Wire EDM
3R-292.3P
For vertical or horizontal collision-free clamping of round workpieces (Ø3-15 mm). Alternatively, rotate the movable jaw and use as a regular 3R-292.3 vice for rectangular workpieces (0-100 mm).
SuperVice, Wire EDM
3R-292.31
Vice with solid jaws for clamping rectangular workpieces up to 100 mm.
SuperVice, Magnum, Wire EDM
3R-292.6HP
Vice for clamping rectangular workpieces up to 155 mm. Note: Mounts on HP, Magnum or MacroTwin levelling adapter.
SuperVice, Magnum, Wire EDM
3R-292.61HP
Vice with solid jaws for clamping rectangular workpieces up to 150 mm. Note: Mounts on HP, Magnum or MacroTwin levelling adapter.
SuperVice, Magnum, Wire EDM
3R-292.6S
Vice for clamping rectangular workpieces up to 150 mm. Note: Mounts on HP, Magnum or MacroTwin levelling adapter.
Clamps, Wire EDM
3R-A239
Clamps of aluminium for mounting a ruler directly on the machine table without reference elements.
Swivelling element 360°, Wire EDM
3R-203
Hydraulic locking of set position. Note: For angle setting, 3R-216 is recommended.
Spacer element 30 mm, Wire EDM
3R-223
Used where vertical or horizontal displacement of workpiece or accessory is necessary.
Spacer element 30 mm, Wire EDM
3R-223.3
Used where vertical or horizontal displacement of workpiece or accessory is necessary.
Swivelling element 360°, Macro
3R-203.66
Swivelling element with manual Macro chuck to be mounted onto a Macro chuck. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.