Tooling for EDM

3R-653-S

For mounting Mini holders in the Macro system.

3R-446.11

For mounting in the Macro system. Side locking of the MacroJunior holder. Duct for flushing through the electrode.

3R-466.4033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode.

3R-601.7-N

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-606-N

Control ruler with ground C-reference for setting MacroNano chucks.

3R-606.1-N

For setting angular positions and for centring MacroNano chucks.

3R-600.23-S

Cast chuck with mounting flange for mounting on the machine spindle or in a fixture.

3R-SP15055

Cast chuck with ground flange for installation in fixture/plate.

3R-466.4033-S

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-466.10033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-466.15033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

C188550

Adaption of Macro on GPS 70.