Tooling for EDM

3R-SP24460

Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-SP26771

Pneumatic chuck for building-in, for example on machine spindle or fixture.

3R-SP26771-RS

Rust resistant pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-600.84-3

Pneumatic chuck for permanent mounting in the machine spindle.

90412.2X

Pneumatic built-in chuck with swivel in the back.

3R-600.84-30

Pneumatic chuck for permanent mounting in the machine spindle. Note: XYZ-references of hardened and ground steel, larger Z-references. Note: When ordering state machine make and type.;

3R-600.86-3

Pneumatic chuck for permanent mounting in the machine spindle.

3R-600.86-30

Pneumatic chuck for permanent mounting in the machine spindle. Note: When ordering state machine make and type. Note: X/Y/Z references of hardened and ground steel, larger Z-references.

3R-651.7E-P

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-651.7E-S

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

3R-602.81RS

Pneumatic chuck for permanent mounting on the machine table.

3R-600.24-4RS

Rust resistant chuck for Macro holder. Mounts on a suitable fixture.