684 results for "Tooling"

3R-A21944

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.

3R-A19724

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.

3R-936-60.38

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-901-20RS

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

3R-936-85.40

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-LS288P

Supplied with marker pen. Size 6x19 mm. Supplied in sets of 288 pcs.

3R-611.2

Foot operation of pneumatic chucks.

3R-A26488

For mounting 3R-600.28-S.

3R-695.2-142RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-695.2-185RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-863.01-10

With pre-programmed unique identity, designed for pallet use.

3R-656.1

For setting angular positions. Ground outside diameter for centring.