124 results for "Tooling"

3R-A21944

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.

3R-936-60.38

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-936-85.40

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-680.24-S

Low profile pneumatic chuck for permanent mounting on the machine spindle or table. Note: Master pallet 3R-606.1 or 3R-686.1-HD is required at installation.

3R-27.2

For mounting on the machine spindle or on a machine table.

90718.04

Pneumatic vibration-damped chuck.

C219650

Pneumatic chuck with built-in Macro chuck. Intended mainly for measuring machines. The following pallets can be mounted in GPS240 by means of C 219 650: Macro 54x54 mm and Macro 70x70 mm

3R-628.31-S

3R-628.41-S

3R-400.34

For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.

3R-321.2-4x90

Hydraulic chuck with set screws, for mounting on a lathe taper.

3R-600.24-4RS

Rust resistant chuck for Macro holder. Mounts on a suitable fixture.