683 results for "Tooling"

3R-611.46

Unit for operation of pneumatic chucks. Three positions – open/neutral/closed.

3R-SP29998

From Matrix185 into Macro system. Chuck adapter with built-in Macro chuck.

3R-650-8x5

For eight pallets 52x52 and 54x54 mm.

3R-27.2

For mounting on the machine spindle or on a machine table.

3R-652.9

For horizontal mounting of Macro holders. Supplied with drawbar for screw locking.

3R-SSP115-BASE

For both pneumatic and manual chucks. This stand alone unit in combination with individual drawbars or drawbar kits, able to cover MacroJunior, Macro, MacroMagnum and Dynafix. Note: Require drawbars with bayonet interface similar to 3R-605.1.

3R-TXXXX

Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.

3R-A21944

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.

3R-936-60.38

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-936-85.40

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-333-03

3 mm allen key.

3R-333-05

5 mm allen key.