Tooling for EDM

3R-653

For mounting Mini holders in the Macro system.

3R-SP29742

Access to clamping from underneath. Torque wrench for optimal performance.

3R-SP29745

Access to clamping from underneath. Torque wrench for optimal performance.

3R-446.11

For mounting in the Macro system. Side locking of the MacroJunior holder. Duct for flushing through the electrode.

3R-600.22

With setting screws for centring.

3R-600.20

For mounting on the machine spindle with 3R-A3620 or on a lathe taper with centring ring 3R-612.6.

3R-600.1-30

Pneumatic chuck for permanent mounting on the machine spindle or onto the machine table or as a lathe chuck.

3R-610.21

Three ground faces for vertical or horizontal mounting on the machine table.

3R-651.7E-P

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-651.7E-S

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

3R-600.24-4RS

Rust resistant chuck for Macro holder. Mounts on a suitable fixture.

3R-6.600-VHS

For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.