Tooling for EDM

3R-695.2-220RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-696.1-220

For setting flatness and angular positions. Ground hole for centering.

3R-690.1-260

Chuck for permanent mounting on the machine table or into a PM press.

3R-SP28345

Chuck for permanent mounting in the machine table or into a PM press.

3R-696.1-260

For setting flatness and angular positions. Ground hole for centering.

3R-27.2

For mounting on the machine spindle or on a machine table.

3R-29.2

Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.

3R-612.70-A

For reference element 70x70 mm. Suitable for some Macro chucks. For more information please ask System 3R.

3R-612.70-S

For reference element 70x70 mm. Suitable for some Macro chucks. For more information please ask System 3R.

3R-699.20-142D

The pallet can be flipped over to gain access from rear side.

3R-699.40-142D

The pallet can be flipped over to gain access from rear side.

3R-SP30752

From Matrix142 to Capto C6 system.