Tooling for EDM
397 résultats pour 'Tooling for EDM'
Pneumatic chuck, Matrix185
3R-690.1-185-RS
Rust resistant chuck for permanent mounting on the machine table.
Pneumatic chuck adapter, Matrix185-Macro
3R-SP29998
From Matrix185 into Macro system. Chuck adapter with built-in Macro chuck.
Control ruler, Matrix185
3R-696.1-185
For setting flatness and angular positions. Ground hole for centering.
Pneumatic chuck, Matrix220
3R-690.1-220
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic chuck, Matrix220
3R-690.1-220-RS
Rust resistant chuck for permanent mounting on the machine table.
Pneumatic built-in chuck, Matrix220
3R-SP28340-RS
Rust resistant chuck for permanent mounting in the machine table.
Drawbar, Matrix220
3R-695.2-220RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Control ruler, Matrix220
3R-696.1-220
For setting flatness and angular positions. Ground hole for centering.
Manual chuck, MacroHP
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.
Rotating spindle, Macro
3R-6.600-VHS
For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.
Manual chuck adapter 90°, Macro-Macro
3R-652.9
For horizontal mounting of Macro holders. Supplied with drawbar for screw locking.
Manual chuck adapter 90°, Macro-MacroJunior
3R-406.9
For horizontal mounting of MacroJunior holders in the Macro system. Screw locking.