Tooling for parts production
416 résultats pour 'Tooling for parts production'
Manual chuck adapter, Macro-Macro
90476.02
Distance adapter to extend the mache spindle. Mechanical clamping from the side.
Manual chuck adapter 90°, Macro-Mini
3R-603.9
For horizontal mounting of Mini holders in the Macro system.
Collet chuck ER20, Matrix110
3R-699.20-110D
The pallet can be flipped over to gain access from rear side.
Manual chuck adapter, Matrix110-Ø20
3R-SP31380-RS
Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.
Rotating spindle, Macro
3R-6.300-EHS16
For clamping in a vertical Macro chuck. Flushing via flushing connection. Recommended collets - Balzer EHS16, Regofix ER16 or Tecnopinz ETS16.
Reference element 54x54 mm, MacroStd
3R-651.7E-XS
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.
Spacer plate 54x54 mm, Macro
3R-658.1E-S
For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.
Pallet 52x52 mm, MacroHP
3R-651.3
Hardened, with 3Refix holes, flushing connection and clearance holes for two fixing screws.