Tooling for wire EDM

3R-605.1RS

3R-605.27RS

3R-605.26

3R-200.1J-U

Universal 150 mm reference element, with oval holes, for all machines that have M8 holes in the machine table, 30 to 40 mm from the edge of the table.

3R-200.XJ-X

Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question. Note: When ordering, state machine mark and type.

3R-225

Can be moved infinitely along the entire reference element.

3R-602.27-1

Chuck adapter with lever for Macro holder in the WEDM system. Note: When mounted on the reference element, the two clamping jaws must be tightened with the same torque, 4 Nm.

3R-622.2

Chuck adapter for Macro holders in the WEDM system.

3R-622.6

Chuck adapter for mounting Macro holders 90º in the Macro system.

3R-422.2

Chuck adapter with axial locking screw for MacroJunior holders in the WEDM system.

3R-466.40RS

Chuck adapter, stainless steel, for MacroJunior holders in the Macro system. Axial locking screw.

3R-252.1

Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system.