Tooling for powder compacting
45 résultats pour 'Tooling for powder compacting'
3Refix PM mandrel, Ø20 mm, 3Refix
3R-901-20PM-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Reference element Ø75 mm, Macro
3R-651.75-50E
Hardened and milled with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Adapterpallet Matrix142-3Refix Ø10, Matrix142
3R-SP29388
Adapterpallet Matrix 142 to 3Refix (44/46) for dies.
Chuck adapter, Matrix142-Macro
3R-SP33230
From Matrix 142 into Macro system. Chuck adapter with built-in Macro chuck.
Clamping force meter Ø72 mm, Macro
3R-SSP122
Intended for checking clamping force of Matrix chucks and for those Macro chucks found in compacting machines (due to cramped and limited space inside machine). In order to check Matrix chucks, see additional converter kits 3R-SSP115MATRIX nnn enabling checking.
Index blocker-pin, Matrix142 and Matrix185
3R-SP29533E
To disable indexing feature on Matrix142 and Matrix185 chucks.