Tooling for EDM

3R-SP28345

Chuck for permanent mounting in the machine table or into a PM press.

3R-696.1-260

For setting flatness and angular positions. Ground hole for centering.

3R-27.2

For mounting on the machine spindle or on a machine table.

3R-29.2

Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.

3R-651.7E-P

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-651.7E-S

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

3R-682.600-A

Chuck adapter with built-in pneumatic Macro chuck for mounting in 3R-680.10-2A.

3R-682.600-RS

Chuck adapter with built-in Pneumatic Macro chuck.

90964

From MacroMagnum into Macro system. Chuck adapter with built-in Macro chuck.

3R-682.600-244

Multi holder with 4 Macro chucks (prepared for total 5 chucks). Angeled positions clears the paths for machine tools.

3R-681.51-SA

Unhardened pallet with hardened references and hole markings for eight clearance holes.

3R-901-10RS

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.