Tooling for EDM
231 résultats pour 'Tooling for EDM'
Pneumatic chuck, MacroCombi
3R-460.86-2
Pneumatic chuck for mounting directly on the machine spindle. All X/Y/Z references in hardened and ground steel. Note: When ordering state machine make and type.
Pneumatic chuck, MacroJunior
3R-410.1-M
For mounting on the machine spindle or in a fixture on the machine table.
Manual chuck, MacroCombi
3R-460.34
For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.
Manual chuck, MacroJunior
3R-400.34
For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.
Manual chuck, MacroCombi
3R-460.31-5
Chuck in HighPerformance version. Five ground surfaces for vertical or horizontal mounting on the machine table.
Pneumatic chuck, MacroCombi
3R-SP18286
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Reference tables, 3Refix
3R-936-60.38
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.
3Refix mandrel, 3Refix
3R-901-10RS
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
3Refix mandrel, 3Refix
3R-901-20E
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.