Tooling for parts production

C846900

For measuring and adjusting the clamping force of manual chucks and for measuring the clamping force of pneumatic chucks.

S230150

For GPS70 pneumatic chucks C188720 and C198700.

S230100

For GPS70/120 pneumatic chucks C188700 and C188770.

S660000

For GPS70 manual chucks C188300 and C530210.

S230510

For GPS120 manual chucks C188320 and C530310

C531000

Sealing of unused bores.

C960500

Manual control unit for clamping and releasing pneumatic chucks.

C695176

Chip protection ring for GPS120 chucks when used manually with GPS70 pallets C695050.

3R-936-60.38

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-901-10RS

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

3R-901-20E

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

3R-903-20.235

Bushes of hardened spring steel 54 HRC. Outside diameter 23.5mm