Tooling for EDM
397 résultats pour 'Tooling for EDM'
Blanks, MacroJunior
3R-494-D50x50
Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.
Blanks, MacroJunior
3R-494-S12x50
Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.
Manual chuck adaper, Midi-Mini
3R-321-4x90º
Hydraulic chuck for mounting on machine spindle with Midi system.
Manual lathe chuck, Mini
3R-321.2-4x90
Hydraulic chuck with set screws, for mounting on a lathe taper.
Manual chuck, MiniBlock, Mini
3R-321.46
Manual hydraulic chuck for vertical or horizontal mounting on the machine table.
Manual chuck adapter, Mini-MacroJunior
3R-463-5033
For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
Electrode holder, Mini
3R-310EE
Holder with hardened reference part Ø20 mm and unhardened flange Ø50 mm.
Electrode holder Ø20 mm, Mini
3R-322-25S
Holder with hardened reference part and unhardened electrode mounting part.
Electrode holder Ø20 mm, Mini
3R-322-100
Holder with hardened reference part and unhardened electrode mounting part.
Reference tables, 3Refix
3R-936-60.38
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.