Tooling for EDM

3R-696.1-110

For setting flatness and angular positions.

3R-SP28219-RS

Rust resistant chuck for permanent mounting in the machine table.

3R-695.2-142RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-699.20-142D

The pallet can be flipped over to gain access from rear side.

3R-699.40-142D

The pallet can be flipped over to gain access from rear side.

3R-SP30752

From Matrix142 to Capto C6 system.

3R-SP30997

From Matrix142 to Macro system.

3R-696.1-142

For setting flatness and angular positions. Ground hole for centering.

3R-695.2-185RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-27.2

For mounting on the machine spindle or on a machine table.

3R-29.2

Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.

3R-651.7E-P

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.