Tooling for EDM

3R-651E-P

Hardened, with clearance holes for four fixing screws.

3R-658.31E

Unhardened with 3Refix holes and two M5 threads. Designed to be mounted on 3R-651.3.

3R-651.13

Hardened holder for square electrodes max 30 mm.

3R-US611.4

For 0-3 mm electrodes.

3R-608.31E

Unhardened with 3Refix holes and four M6 threads. Designed to be mounted on 3R-601.3 or 3R-601.52.

3R-651.70-P

Unhardened palett with reference element 3R-651.7-P.

3R-651.70-XS

Unhardened palett with reference element 3R-651.7-XS.

3R-651.7E-P

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-651.7E-S

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

3R-601.52

Hardened, with 3Refix holes and clearance holes for ten fixing screws.

3R-600.24-4RS

Rust resistant chuck for Macro holder. Mounts on a suitable fixture.

3R-6.600-VHS

For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.