Tooling for EDM
397 résultats pour 'Tooling for EDM'
Rotating spindle, Macro
3R-6.300-EHS16
For clamping in a vertical Macro chuck. Flushing via flushing connection. Recommended collets - Balzer EHS16, Regofix ER16 or Tecnopinz ETS16.
Reference element 54x54 mm, MacroStd
3R-651.7E-XS
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.
Spacer plate 54x54 mm, Macro
3R-658.1E-S
For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.
Pallet 52x52 mm, MacroHP
3R-651.3
Hardened, with 3Refix holes, flushing connection and clearance holes for two fixing screws.
Control ruler, Matrix142
3R-696.1-142
For setting flatness and angular positions. Ground hole for centering.
Drawbar, Matrix185
3R-695.2-185RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Pneumatic chuck, Matrix185
3R-690.1-185-RS
Rust resistant chuck for permanent mounting on the machine table.
Pallet 70x70 mm, Macro
3R-608.31E
Unhardened with 3Refix holes and four M6 threads. Designed to be mounted on 3R-601.3 or 3R-601.52.
Pneumatic chuck, Matrix220
3R-690.1-220
Chuck for permanent mounting on the machine table or into a PM press.