Tooling for EDM
397 résultats pour 'Tooling for EDM'
Manual chuck adapter, Macro-MacroJunior
3R-466.10033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
Manual chuck adapter, Macro-MacroJunior
3R-466.15033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
Sealing ring, Low, Macro
3R-612.75-S
For reference element Ø75 mm. Suitable for some Macro chucks. For more information please ask System 3R.
Reference element 54x54 mm, MacroStd
3R-651.7E-XS
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.
Spacer plate 54x54 mm, Macro
3R-658.1E-S
For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.
3Refix mandrel, 3Refix
3R-901-10E-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.