Tooling for powder compacting
45 résultats pour 'Tooling for powder compacting'
Manual chuck, MacroMagnum PM
3R-680.27-150
Manual chuck for permanent mounting in spindle of powder press machine.
Adapterpallet Matrix142-3Refix Ø10, Matrix142
3R-SP29388
Adapterpallet Matrix 142 to 3Refix (44/46) for dies.
Chuck adapter, Matrix142-Macro
3R-SP33230
From Matrix 142 into Macro system. Chuck adapter with built-in Macro chuck.
Fixture for punch, Macro
90238
Fixture for punch on Macro, in order to wire-cut a through hole within Ø20 mm.
Lifting device, Matrix110 and Matrix142
3R-692.8-142
In combination with 3R-692.7-110 and 3R-692.7-142 to enable lift by crane.
Lifting device, Matrix185 and Matrix220
3R-692.8-220
In combination with 3R-692.7-185 and 3R-692.7-220 to enable lift by crane.
Punch alignment system
D-20158-BASE
This fixture enables adjustment of punches within metal powder compacting by Macro system. The fixture is a stand-alone unit. It is possible to replace the indicators with electrical sensors. Free access from underneath, to access fixation-screws for the pallets.