Tooling for parts production
416 résultats pour 'Tooling for parts production'
Pneumatic chuck, Matrix110
3R-690.1-110
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic built-in chuck, Matrix142
3R-SP28219
Chuck for permanent mounting in the machine table or into a PM press.
Manual chuck, MacroHP
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.
Reference element Ø142 mm, MacroMagnum
3R-681.71
Hardened reference element with clearance holes for fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Manual chuck adapter 90°, Macro-Macro
3R-652.9
For horizontal mounting of Macro holders. Supplied with drawbar for screw locking.
Drawbar, Matrix260
3R-695.2-260
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Reference element Ø75 mm, MacroNano
3R-651.75E-N
Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Control ruler, MacroNano
3R-606.1-N
For setting angular positions and for centring MacroNano chucks.
Manual chuck, MacroStd
3R-600.23-S
Cast chuck with mounting flange for mounting on the machine spindle or in a fixture.
Manual chuck, MacroStd
3R-600.24-S
Cast chuck with ground back face for mounting on the machine spindle with 3R-A11489 or in a fixture on the machine table.