Tooling for EDM
397 résultats pour 'Tooling for EDM'
Pallet, Maxi
3R-29.2
Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 54x54 mm, MacroStd
3R-651.7E-S
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.
Reference element Ø142 mm, MacroMagnum
3R-681.71
Hardened reference element with clearance holes for fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Drawbar, Matrix110
3R-695.2-110
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix142
3R-695.2-142
Note: In automation the gripper has to grip on the pallet and not on the drawbar.