Tooling for EDM
397 résultats pour 'Tooling for EDM'
Holder, MacroJunior
3R-465-LE
For round electrodes Ø4-8 mm or square < 8x18 mm, and with maximum height 30 mm.
Blanks, MacroJunior
3R-494-D10x50
Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.
Blanks, MacroJunior
3R-494-D12x50
Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.
Reference tables, 3Refix
3R-936-60.38
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.
3Refix mandrel, 3Refix
3R-901-10RS
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
3Refix mandrel, 3Refix
3R-901-20E
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Slotted bushes, 3Refix
3R-903-20.235
Bushes of hardened spring steel 54 HRC. Outside diameter 23.5mm
Slotted bushes, 3Refix
3R-903-20-256
Bushes of hardened spring steel 54 HRC. Outside diameter 25.6 mm
Slotted bushes, 3Refix
3R-903-20-275
Bushes of hardened spring steel 54 HRC. Outside diameter 27.5 mm