Tooling for parts production
130 résultats pour 'Tooling for parts production'
3Refix mandrel, 3Refix
3R-901-10E-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Drawbar, Matrix185
3R-695.2-185RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Pneumatic chuck, Matrix185
3R-690.1-185-RS
Rust resistant chuck for permanent mounting on the machine table.
Pneumatic chuck adapter, Matrix185-Macro
3R-SP29998
From Matrix185 into Macro system. Chuck adapter with built-in Macro chuck.
Control ruler, Matrix185
3R-696.1-185
For setting flatness and angular positions. Ground hole for centering.
Manual adapter, Macro-Capto C6
3R-SP29742
Access to clamping from underneath. Torque wrench for optimal performance.
Manual adapter, Macro-HSK-63A
3R-SP29745
Access to clamping from underneath. Torque wrench for optimal performance.
Rotating spindle, Macro
3R-6.300-EHS16
For clamping in a vertical Macro chuck. Flushing via flushing connection. Recommended collets - Balzer EHS16, Regofix ER16 or Tecnopinz ETS16.
Reference element 54x54 mm, MacroStd
3R-651.7E-XS
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.