Tooling for parts production
416 résultats pour 'Tooling for parts production'
Reference element 70x70 mm, MacroNano
3R-601.7-N
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Manual chuck, MacroStd
3R-600.24-S
Cast chuck with ground back face for mounting on the machine spindle with 3R-A11489 or in a fixture on the machine table.
Pneumatic chuck, MacroHP
3R-600.15-3
Rust resistant pneumatic chuck for permanent mounting on the machine table.
Pneumatic chuck, MacroStd
3R-SP24460
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 54x54 mm, MacroStd
3R-651.7E-S
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.