Tooling for parts production
416 résultats pour 'Tooling for parts production'
Manual chuck, MacroHP
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.
Rotating spindle, Macro
3R-6.600-VHS
For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.
Drawbar, Matrix110
3R-695.2-110
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix142
3R-695.2-142
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix185
3R-695.2-185
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Reference element Ø75 mm, MacroNano
3R-651.75E-N
Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 70x70 mm, MacroNano
3R-601.7-N
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Control ruler, MacroNano
3R-606-N
Control ruler with ground C-reference for setting MacroNano chucks.
Control ruler, MacroNano
3R-606.1-N
For setting angular positions and for centring MacroNano chucks.