Tooling for wire EDM
144 résultats pour 'Tooling for wire EDM'
Neutral B-axis, Wire EDM
3R-60.360SA
Compact Rotary Indexing Tables with pneumatic Macro chuck. Indexing 0-360° with smallest step 0.001°. Air connections for open/close, as well as turbo-locking/air-blast cleaning. Supplied with a separate control unit.
Automatic indexing chuck, Wire EDM
D-30206
Pneumatic built-in chucks for Macro holders. Can also be used in milling and grinding operations without high cutting forces.
Rotation table with Matrix 185 interface, Wire EDM
D-30229-3
Rotation table with Matrix 185 interface. Note: The units are controlled by the machine. The mark and type of the machine must therefore be stated when ordering.
Holder set, Wire EDM
3R-218S
Set of three holders and fixing parts enabling 3Point levelling and support (aka 3P). For round and rectangular workpiece.
3Ruler, Wire EDM
3R-239-XXX
The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.
3Ruler vice, Wire EDM
3R-239.1
Movable jaws of SuperVice design provide a wide clamping range for rectangular workpieces. Detachable Z-support tabs ensure simple setting-up.
3Ruler, double-sided, Wire EDM
3R-239-XXXD
Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.
Vee holder, Wire EDM
3R-239.3
For clamping round workpieces. To be mounted on 3Ruler or holder 3R-237.2, 3R-292.66HP or 3R-239-XXX.
Reference stop, Wire EDM
3R-225.2
For positioning 3Ruler anywhere on the reference elements. The stops have adjusting screws for accurate alignment.