Tooling for EDM
397 résultats pour 'Tooling for EDM'
Reference element Ø75 mm, Macro
3R-651.75E-P
Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Gate chuck, Macro
3R-US90-601
Fixed index positions at 0, 30, 45, 60 and 90 degrees. Other angles are set with a sine rule.
Pallet, Ø116 mm, MacroHP
3R-601.52
Hardened, with 3Refix holes and clearance holes for ten fixing screws.
Pallet, Ø116 mm, Macro
3R-608.51E
Unhardened with 3Refix holes and four M6 threads. Designed to be mounted on 3R-601.3 or 3R-601.52.
Pneumatic built-in chuck, Matrix220
3R-SP28340-RS
Rust resistant chuck for permanent mounting in the machine table.
Drawbar, Matrix220
3R-695.2-220RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Control ruler, Matrix220
3R-696.1-220
For setting flatness and angular positions. Ground hole for centering.
Pneumatic chuck, Matrix260
3R-690.1-260
Chuck for permanent mounting on the machine table or into a PM press.