Tooling for parts production
416 résultats pour 'Tooling for parts production'
Pneumatic chuck, MacroStd
3R-SP24460
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Control ruler, Matrix260
3R-696.1-260
For setting flatness and angular positions. Ground hole for centering.
Pneumatic chuck, MacroHP
3R-SP26771-RS
Rust resistant pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pneumatic chuck, MacroStd
3R-600.84-30
Pneumatic chuck for permanent mounting in the machine spindle. Note: XYZ-references of hardened and ground steel, larger Z-references. Note: When ordering state machine make and type.;
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 54x54 mm, MacroStd
3R-651.7E-S
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.
Manual chuck, MacroHP
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.
Rotating spindle, Macro
3R-6.600-VHS
For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.
Manual chuck adapter 90°, Macro-Macro
3R-652.9
For horizontal mounting of Macro holders. Supplied with drawbar for screw locking.