Tooling for wire EDM

3R-213.4

Vice for mounting rectangular workpieces up to 25 mm in the Mini system.

3R-272HP

For manual mounting of SuperVice, a holder or a fixture in the WEDM system. Note: All holders including HP can be mounted. Also fits the ICS system if the clamping jaw (17850-00) is changed.

3R-262HP

For mounting SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted.

3R-266.4

For manual mounting of SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted.

3R-266.5

For mounting SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted.

3R-282.12HP

For mounting Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted.

3R-266.12HP

For manual mounting of Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted

3R-228J

Stone with three ground faces, a reference element and a clearance stone. Together with a surface plate and a dial indicator, 3R-228J is an excellent presetting tool for a modest outlay.

3R-228U

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate and a dial indicator.

3R-228.1

Surface plate with reference stops, a mounting stone with bushings and holes for mounting a chuck/reference element and through holes for mounting on the surface plate, and a check stone. A dial indicator is required.

3R-228E

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate.

3R-228EI

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate. Note: 3R-228EI delivers with dial indiactor measuring inch.