Tooling for parts production

C188560

Adaption of GPS 70 on Macro.

3R-6.321-HS

Electrical spindle for round electrodes.

3R-6.600-VS

For mounting in a Macro chuck. Flushing via flushing connection. For vertical mounting in EDM machines.

3R-6.300-EHS16

For clamping in a vertical Macro chuck. Flushing via flushing connection. Recommended collets - Balzer EHS16, Regofix ER16 or Tecnopinz ETS16.

3R-651.7E-XS

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

3R-658.1E-S

For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.

3R-651E-P

Hardened, with clearance holes for four fixing screws.

3R-651.3

Hardened, with 3Refix holes, flushing connection and clearance holes for two fixing screws.

3R-658.31E

Unhardened with 3Refix holes and two M5 threads. Designed to be mounted on 3R-651.3.

3R-658.2E-S

Unhardened holder for flat electrodes with max width 30 mm. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.

3R-658.4E-S

Unhardened holder for square or round electrodes, max 30 mm. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.

3R-651.13

Hardened holder for square electrodes max 30 mm.