Tooling for parts production
416 results for 'Tooling for parts production'
Pallet Ø156 mm, MacroMagnum
3R-681.51
Hardened pallet, with 3Refix holes, threads and clearance holes for eight and ten fixing screws.
Control ruler, Matrix142
3R-696.1-142
For setting flatness and angular positions. Ground hole for centering.
Drawbar, Matrix185
3R-695.2-185RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Pneumatic chuck, Matrix185
3R-690.1-185-RS
Rust resistant chuck for permanent mounting on the machine table.
Pneumatic chuck adapter, Matrix185-Macro
3R-SP29998
From Matrix185 into Macro system. Chuck adapter with built-in Macro chuck.
Chip guard, MacroMagnum
90443
For Macro pallets 52x52, 54x54 and 70x70 in MacroMagnum chucks. For sealing we recommend 3R-RU52L or 3R-RU70 respectively in combination with the debris guard.
Pneumatic chuck, MacroNano
3R-600.84-3N
Chuck for building-in, for example in a fixture, dividing head or B-axis.
Control ruler, Matrix220
3R-696.1-220
For setting flatness and angular positions. Ground hole for centering.
Pneumatic chuck, MacroNano
3R-610.46-3N
Chuck for mounting on the machine table with integral air unit. For horizontal and vertical use.