Tooling for parts production
416 results for 'Tooling for parts production'
Manual Multi Station, MacroMagnum-Macro
3R-682.600-244
Multi holder with 4 Macro chucks (prepared for total 5 chucks). Angeled positions clears the paths for machine tools.
Pallet Ø156 mm, MacroMagnum
3R-681.51-SA
Unhardened pallet with hardened references and hole markings for eight clearance holes.
Pallet Ø156 mm, MacroMagnum
3R-681.156-A
Unhardened pallet with hardened reference element type 3R-681.71.
Pallet Ø156 mm, MacroMagnum
3R-681.51
Hardened pallet, with 3Refix holes, threads and clearance holes for eight and ten fixing screws.
Control ruler, Matrix185
3R-696.1-185
For setting flatness and angular positions. Ground hole for centering.
Pneumatic chuck, Matrix220
3R-690.1-220
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic chuck, Matrix220
3R-690.1-220-RS
Rust resistant chuck for permanent mounting on the machine table.
Control ruler, MacroMagnum
3R-686.1-HD
Control ruler for setting flatness and angular positions. Ground hole for centring.
Drawbar, Matrix220
3R-695.2-220RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Control ruler, Matrix220
3R-696.1-220
For setting flatness and angular positions. Ground hole for centering.
Pneumatic chuck, Matrix260
3R-690.1-260
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic built-in chuck, Matrix260
3R-SP28345
Chuck for permanent mounting in the machine table or into a PM press.