Tooling for EDM

3R-A11489

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S.

3R-A3620

Adapter plate with eight adjusting screws for mounting spindle chucks.

3R-650-8x5

For eight pallets 52x52 and 54x54 mm.

3R-A26488

For mounting 3R-600.28-S.

90842.01

To convert 3R-600.24-S to enable long drawbar 3R-605.1.

3R-901-10E-TX

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

3R-614-06

Mainly for Macro chucks.

3R-610.46-3

Pneumatic chuck for horizontal or vertical use.

3R-SP7359

Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-SP7359-RS

Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-A27634

To convert 3R-600.28-S to enable long drawbar 3R-605.1.

3R-699.20-110D

The pallet can be flipped over to gain access from rear side.