Tooling for EDM
397 results for 'Tooling for EDM'
Drawbar, Matrix220
3R-695.2-220RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Control ruler, Matrix220
3R-696.1-220
For setting flatness and angular positions. Ground hole for centering.
Pneumatic chuck, Matrix260
3R-690.1-260
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic built-in chuck, Matrix260
3R-SP28345
Chuck for permanent mounting in the machine table or into a PM press.
Control ruler, Matrix260
3R-696.1-260
For setting flatness and angular positions. Ground hole for centering.
Pallet, Maxi
3R-29.2
Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.
Pneumatic chuck, MacroNano
3R-600.84-3N
Chuck for building-in, for example in a fixture, dividing head or B-axis.
Pneumatic chuck, MacroNano
3R-610.46-3N
Chuck for mounting on the machine table with integral air unit. For horizontal and vertical use.
Reference element 54x54 mm, MacroNano
3R-651.7E-N
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.