Tooling for EDM
397 results for 'Tooling for EDM'
Electrode holder Ø20 mm, Mini
3R-322-50E
Holder with hardened reference part and unhardened electrode mounting part.
Pneumatic built-in chuck, Matrix110
3R-SP28395
Chuck for permanent mounting in the machine table or into a PM press.
Pneumatic built-in chuck, Matrix185
3R-SP28268
Chuck for permanent mounting in the machine table or into a PM press.
Pneumatic built-in chuck, Matrix142
3R-SP28219
Chuck for permanent mounting in the machine table or into a PM press.
Drawbar, Matrix142
3R-695.2-142
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix185
3R-695.2-185
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix220
3R-695.2-220
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix260
3R-695.2-260
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Pneumatic chuck, MacroCombi
3R-SP18286
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pneumatic chuck, MacroCombi
3R-SP19047
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Manual chuck adapter 90°, MacroJunior
3R-467.9-1
For horizontal mounting of MacroJunior holders. Screw locking. Note: For EDM machining only..
Pallet 25 mm, MacroJunior
3R-491E
For copper or graphite electrodes. NOTE: The electrode is installed with screw and adhesive assembly, or alternatively brazing.