- EDM Tapping electrodes are used to drill and tap a hole in one operation in very hard materials, with tight tolerances and high productivity demands
- You benefit from more flexibility and better cost-effectiveness
Specs
Specs
Metallic electrodes | |
|---|---|
| Diameter (mm) |
|
| Hole for flushing |
|
| Length thread (mm) |
|
| Length (mm) |
|
| Quantity / Pack |
|
| Thread metric |
|
Variants
Reference | Identifier | Diameter (mm) | Length (mm) | Length thread (mm) | Thread metric |
|---|---|---|---|---|---|
951351003 | Tapping Copper electrode, orbital M3 | 2.3 | 80 | 50 | M3 (0.50 mm) |
| 951351004 | Tapping Copper electrode, orbital M4 | 2.9 | 80 | 50 | M4 (0.70 mm) |
| 951351005 | Tapping Copper electrode, orbital M5 | 3.8 | 120 | 80 | M5 (0.80 mm) |
| 951351006 | Tapping Copper electrode, orbital M6 | 4.5 | 120 | 80 | M6 (1.00 mm) |
| 951351008 | Tapping Copper electrode, orbital M8 | 6 | 120 | 80 | M8 (1.25 mm) |
| 951351010 | Tapping Copper electrode, orbital M10 | 7.8 | 120 | 80 | M10 (1.50 mm) |
| 951351012 | Tapping Copper electrode, orbital M12 | 9.4 | 120 | 80 | M12 (1.75 mm) |
| 951351014 | Tapping Copper electrode, orbital M14 | 11.1 | 120 | 80 | M14 (2.00 mm) |
| 951351016 | Tapping Copper electrode, orbital M16 | 13.1 | 120 | 80 | M16 (2.00 mm) |
| 951351018 | Tapping Copper electrode, orbital M18 | 14.4 | 120 | 80 | M18 (2.50 mm) |
| 951351100 | Tapping Copper electrode, orbital 1/8" | 8 | 120 | 80 | 1/8" |
| 951351101 | Tapping Copper electrode, orbital 1/4" | 11 | 120 | 80 | 1/4" |
| 951351102 | Tapping Copper electrode, orbital 3/8" | 14.5 | 120 | 80 | 3/8" |
| 951351103 | Tapping Copper electrode, orbital 1/2" | 18 | 120 | 80 | 1/2" |
There are no documents available for this product.