Tooling for EDM
397 results for 'Tooling for EDM'
Electrode holder Ø20 mm, Mini
3R-322-50E
Holder with hardened reference part and unhardened electrode mounting part.
Pneumatic chuck, Matrix185
3R-690.1-185
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic chuck, Matrix142
3R-690.1-142
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic built-in chuck, Matrix220
3R-SP28340
Chuck for permanent mounting in the machine table or into a PM press.
Pneumatic built-in chuck, Matrix110
3R-SP28395
Chuck for permanent mounting in the machine table or into a PM press.
Pneumatic built-in chuck, Matrix185
3R-SP28268
Chuck for permanent mounting in the machine table or into a PM press.
Reference element Ø142 mm, MacroMagnum
3R-681.71
Hardened reference element with clearance holes for fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Manual chuck adapter 90°, Macro-Macro
3R-652.9
For horizontal mounting of Macro holders. Supplied with drawbar for screw locking.
Manual chuck adapter 90°, Macro-MacroJunior
3R-406.9
For horizontal mounting of MacroJunior holders in the Macro system. Screw locking.
Pneumatic chuck, MacroJunior
3R-410.1-M
For mounting on the machine spindle or in a fixture on the machine table.
Manual chuck, MacroCombi
3R-460.34
For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.