Tooling for EDM
397 results for 'Tooling for EDM'
Rotating spindle, Macro
3R-6.600-VS
For mounting in a Macro chuck. Flushing via flushing connection. For vertical mounting in EDM machines.
Rotating spindle, Macro
3R-6.300-EHS16
For clamping in a vertical Macro chuck. Flushing via flushing connection. Recommended collets - Balzer EHS16, Regofix ER16 or Tecnopinz ETS16.
Reference element 54x54 mm, MacroStd
3R-651.7E-XS
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.
Spacer plate 54x54 mm, Macro
3R-658.1E-S
For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.
Pallet 52x52 mm, MacroHP
3R-651.3
Hardened, with 3Refix holes, flushing connection and clearance holes for two fixing screws.
Pallet 52x54 mm, Macro
3R-658.31E
Unhardened with 3Refix holes and two M5 threads. Designed to be mounted on 3R-651.3.
3Refix mandrel, 3Refix
3R-901-10E-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Holder 54x54 mm, Macro
3R-658.4E-S
Unhardened holder for square or round electrodes, max 30 mm. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.
Pneumatic chuck, MacroHP
3R-SP7359
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.