Tooling for parts production
416 results for 'Tooling for parts production'
Manual chuck (low profile), MacroStd
3R-600.28-S
Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488.
Pneumatic chuck, MacroHP
3R-600.15-3
Rust resistant pneumatic chuck for permanent mounting on the machine table.
Pneumatic chuck, MacroStd
3R-SP24460
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pnematic chuck, MacroHP
3R-SP26771
Pneumatic chuck for building-in, for example on machine spindle or fixture.
Pneumatic chuck, MacroHP
3R-SP26771-RS
Rust resistant pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Manual chuck, MacroHP
3R-600.20
For mounting on the machine spindle with 3R-A3620 or on a lathe taper with centring ring 3R-612.6.